Welcome back!
You're currently shopping with your default address:
Signature SELECT Coolant & Anti Freeze Ready To Use - 1 Gallon
Ready to use. Prediluted with water. Quality guaranteed. Recommended for all vehicles foreign & domestic. Compatible with any color anti-freeze. Signature Home Coolant & Anti-Freeze: Specially formulated, recommended and compatible with any anti-freeze/coolant. Compatible With Any Color Anti-freeze: green, yellow, orange, purple, fuchsia and blue, as well as any make or model of car and light duty on road truck both foreign and domestic. Inhibitor system for protection against rust and corrosion. Protects against winter freeze-ups. This long lasting formula will offer protection up to 5 years or 150,000 miles against rust, corrosion and extreme temperatures when a complete cooling systems flush and fill is performed. Meets ASTM D3306 and D4985. Minimum Boiling Protection: 265 degrees F. Minimum Freezing Protection: -35 degrees F. With a 14 lb. pressure cap at sea level. A 50% solution will provide boiling protection at 226 degrees F at sea level. Boiling points increase approximately 3 degrees for each pound of pressure exerted by pressure cap. www.betterlivingbrandsLLC.com. Our Promise: Quality and satisfaction 100% guaranteed or your money back.
Warning
Harmful or fatal if swallowed. Do not drink anti-freeze solution. If swallowed, do not induce vomiting. Immediately contact a poison control center, emergency treatment center or physician. Ethylene Glycol Base. Upon opening remove entire contents at once. Do not store in open or unlabeled containers. Do not reuse container. Keep out of reach of children. Solution is poisonous to animals.
Directions
Do not add water. Harmful or fatal if swallowed. Before using, read carefully the warnings on back panel. This product is a pre-diluted precision blend of demineralized water and anti-freeze with a scientifically designed inhibitor system to protect all vehicle metals, especially aluminum, against rust and corrosion. No mixing required. Simply add the desired amount directly into the radiator. There will be no change in color as this is the product's nature. For complete system replacement, please follow these directions: Cooling system must be clean, free of leaks, and in satisfactory operating condition. The following procedure for preparation of the cooling system and installation of anti-freeze and coolant is recommended. 1. Drain cooling system and flush thoroughly. 2. Inspect cooling system fittings and hoses. 3. Replace hoses, fittings and clamps as necessary. 4. Close all drain cocks and engine block plugs. Fill system with anti-freeze mixture until top tank is about half full. 5. Start engine and run until thermostat opens to release any air trapped in cylinder block. 6. Turn off engine and allow to cool. Check again for leaks. Check radiator level and add anti-freeze mixture as necessary. 7. Follow local laws and regulations when disposing of used anti-freeze/coolant.
About the Producer
BETTER LIVING BRANDS
Similar Items
Loading...
Featured Items
Loading...
Disclaimer
We rely on product packaging and data from third-party sources to provide the content to you, including dietary and allergen content. We do not guarantee the accuracy, completeness, or availability of such information. Content is for general informational purposes only. You should not rely solely on the information displayed on our website. Actual product may vary. Always read labels, warnings, and directions prior to use or consumption. If you have questions or require more information about a product, please contact the manufacturer directly.
Allergen Notice: Products in our stores may contain, or may have been exposed to, one or more of the following allergens: peanuts, tree nuts, sesame, milk, eggs, wheat, soy, fish and crustacean shellfish.